Connection-Pins for Extention-Boards

Topics about DSLogic as a wireless data acquisition device
Hello,

I search for the correct Pins to connect a Extention-Testboard (Arduino) to the Core-Modul.

The external interface from Core-Modul has the Pins:
TO, TI,CLK

The Wireless-Extentionboard has the Pins:
CTL0,CTL1,CTL2

The Wireless-Software (/wireless_rx/nRF24L01.h) from GIThub defines the Pins

#define DSCLK 16
#define DSEN 14

But the PCB.pdf shows the Atmega-Pins for CTL0,CTL1, CTL2 are -> 23,24,25.

(Data is Port D to Ch 0-7 )

What are the right Control-Pins to connect an Arduino to the core-modul ?
Can I use 3.3V and 5V-TTL ?

Thank you for the help

Jörg
jolinux
 
Posts: 13
Joined: Thu Nov 19, 2015 1:33 am

jolinux wrote:Hello,

I search for the correct Pins to connect a Extention-Testboard (Arduino) to the Core-Modul.

The external interface from Core-Modul has the Pins:
TO, TI,CLK

The Wireless-Extentionboard has the Pins:
CTL0,CTL1,CTL2

The Wireless-Software (/wireless_rx/nRF24L01.h) from GIThub defines the Pins

#define DSCLK 16
#define DSEN 14

But the PCB.pdf shows the Atmega-Pins for CTL0,CTL1, CTL2 are -> 23,24,25.

(Data is Port D to Ch 0-7 )

What are the right Control-Pins to connect an Arduino to the core-modul ?
Can I use 3.3V and 5V-TTL ?

Thank you for the help

Jörg


Please refer to the schematic of wireless extension board on our wiki:
http://dreamsourcelab.com/wiki/index.ph ... sion_Board
Andy
Site Admin
 
Posts: 149
Joined: Fri Jul 11, 2014 9:20 am

Hallo Andy,

sorry but I refer the schematic.

The Pins from source-code do not match to the schematic-infos.


The Wireless-Extention need 2 Controll-Pins Clock and Enable.
The Wireless-Extentionboard has the Pins: CTL0,CTL1,CTL2

What is Clock ?
What is Enable ?

Thank you for the help

Jörg
jolinux
 
Posts: 13
Joined: Thu Nov 19, 2015 1:33 am

I think you need this pin map:
145202dn1isx9aiz9ajaox.jpg
145202dn1isx9aiz9ajaox.jpg (491.48 KiB) Viewed 2945 times
Andy
Site Admin
 
Posts: 149
Joined: Fri Jul 11, 2014 9:20 am


Return to Wireless DAQ

Who is online
Users browsing this forum: No registered users and 1 guest