I search for the correct Pins to connect a Extention-Testboard (Arduino) to the Core-Modul.
The external interface from Core-Modul has the Pins:
The Wireless-Extentionboard has the Pins:
The Wireless-Software (/wireless_rx/nRF24L01.h) from GIThub defines the Pins
#define DSCLK 16
#define DSEN 14
But the PCB.pdf shows the Atmega-Pins for CTL0,CTL1, CTL2 are -> 23,24,25.
(Data is Port D to Ch 0-7 )
What are the right Control-Pins to connect an Arduino to the core-modul ?
Can I use 3.3V and 5V-TTL ?
Thank you for the help